J'ai installé un disque dur externe My Book de Western Digital. Je fonctionne sous Windows XP. Quand j'ouvre mon ordi et que le disque dur est branché par le câble USB, l'ordi semble chercher ce qu'il lui faut pour démarrer dans mon disque dur au lieu de chercher sur le disque C... Je doit alors fermer l'ordi manuellement, débrancher le câble USB du disque dur et démarrer à nouveau. Ce n'est pas nécessairement un gros problème, mais c'est tannant...
J'ai déjà changé des paramètres dans le bios, mais ça ne fonctionne pas plus. Voici ce que j'ai changé:
USB function< enabled
Legacy USB support < auto
USB2 controller < enabled
USB2 controller < Full speed
Que faire de plus... Le site d'assistance du fournisseur indique:
In the system BIOS, disable the Boot from USB device option and the USB Legacy Support option. Doing this will allow the PC to complete the boot process to the internal hard drive and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB drive. Once the computer is fully booted into Windows, connect the USB drive and wait for the operating system to detect the drive.
J'ai un clavier et une souris USB
Important: Do not disable the USB Legacy Support if you are using a USB Keyboard. Doing so will prevent you from being able to use the keyboard during the booting sequence.
Merci à l'avance






Répondre en citant



